Original: $249.99
-65%$249.99
$87.50The Story
12" 4Ī© Freeair Marine Subwoofer
BUMP THE BOAT
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KMF series of subs.
Ā
- FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded SantopreneĀ® Surround
- UniPlateā¢ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
Ā
Want setup help? Go to KICKERU for a free woofer and amplifier configuration app!
*The KMF 12-inch Subwoofer works best with 175 watts of recommended power. See below for more details.
| Thiele/Small Parameters |
 Ā 45KMF124Ā T/S Parameters PDF |
| Woofer(in,mm) |
| 12, 30 |
| Impedance (OHMS) |
| 4 SVC |
| Peak Power Handling(Watts) |
| 350 |
| Continuous Power Handling(Watts RMS) |
| 175 |
| Sealed Enclosure Volume Min-Max(ftĀ³, L) |
| N/A |
| Vented Enclosure Volume Min-Max(ftĀ³, L) |
| N/A |
| Frequency Response(Hz) |
| 30-500 |
| Mounting Depth(in, cm) |
| 5.5, 13.9 |
| Hole Diameter(in, cm) |
| 11, 27.9 |
| Outer Diameter(in, cm) |
| 13, 32.95 |
| What's in the Box: |
| 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
Description
12" 4Ī© Freeair Marine Subwoofer
BUMP THE BOAT
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KMF series of subs.
Ā
- FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded SantopreneĀ® Surround
- UniPlateā¢ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
Ā
Want setup help? Go to KICKERU for a free woofer and amplifier configuration app!
*The KMF 12-inch Subwoofer works best with 175 watts of recommended power. See below for more details.
| Thiele/Small Parameters |
| Ā 45KMF124Ā T/S Parameters PDF |
| Woofer(in,mm) |
| 12, 30 |
| Impedance (OHMS) |
| 4 SVC |
| Peak Power Handling(Watts) |
| 350 |
| Continuous Power Handling(Watts RMS) |
| 175 |
| Sealed Enclosure Volume Min-Max(ftĀ³, L) |
| N/A |
| Vented Enclosure Volume Min-Max(ftĀ³, L) |
| N/A |
| Frequency Response(Hz) |
| 30-500 |
| Mounting Depth(in, cm) |
| 5.5, 13.9 |
| Hole Diameter(in, cm) |
| 11, 27.9 |
| Outer Diameter(in, cm) |
| 13, 32.95 |
| What's in the Box: |
| 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
